seminar on carbon nanotubes in october by vibin

1. By Vibin Varghese 10CHE6012 SJC(PG)

2. Sumio Iijima ( 飯島 澄男 Iijima Sumio , born May 2, 1939) is a Japanese physicist , often cited as the discoverer of carbon nanotubes .

3. Carbon nanotubes ( CNTs ; also known as buckytubes ) are allotropes of carbon with a cylindrical nanostructure. Nanotubes are members of the fullerene structural family, which also includes the spherical buckyballs . The ends of a nanotube might be capped with a hemisphere of the buckyball structure. Their name is derived from their size, since the diameter of a nanotube is on the order of a few nanometers (approximately 1/50,000th of the width of a human hair), while they can be up to 18 centimeters in length (as of 2010)

4. The nature of the bonding of a nanotube is described by applied quantum chemistry . The chemical bonding of nanotubes is composed entirely of sp 2 bonds , similar to those of graphite . This bonding structure, which is stronger than the sp 3 bonds found in diamonds , provides the molecules with their unique strength. Nanotubes naturally align themselves into "ropes" held together by Van der Waals forces

5. Types of carbon nanotubes and related structures Structure Nanotubes are mainly categorized as: single-walled nanotubes (SWNTs) And multi-walled nanotubes (MWNTs).

7. More conveniently, a pair of indices ( n , m ) is used . The indices refer to equally long unit vectors at 60° angles to each other across a single 6-member carbon ring . Taking the origin as carbon number 1, the a 1 unit vector may be considered as the line drawn from carbon 1 to carbon 3, and the a 2 unit vector is then the line drawn from carbon 1 to carbon 5

8. There are three distinct ways in which a graphene sheet can be rolled into a tube, as shown below: (n,m)=(5,5) "armchair". (n,m)=9,0) "zigzag" (n,m)=(10,5) “ chiral”

9. To produce a nanotube with the indices say,(6,3) the sheet is rolled up so that the atom labelled (0,0) is superimposed on the one labelled (6,3)

10. Tubes having n = m (chiral angle = 0°) are called "armchair". Those with m = 0 (chiral angle = 30°) "zigzag". When n and m are any two different positive integral numbers they are called “chiral” "armchair". "zigzag". “ chiral”

12. The terms "armchair" and "zig-zag" refer to the arrangement of hexagons around the circumference. “ Chiral ” means that it can exist in two mirror-related forms. The diameter of a nanotube can be calculated from its (n,m) indices as follows where a = 0.246 nm.

16. Multi-walled nanotubes (MWNT) Multi-walled nanotubes (MWNT) consist of multiple rolled layers (concentric tubes) of graphite. There are two models which can be used to describe the structures of multi-walled nanotubes

17. There are two types of MWNTs.They are: 1.Russian Doll model and 2. Parchment model

18. In the Russian Doll model, sheets of graphite are arranged in concentric cylinders In the Parchment model, a single sheet of graphite is rolled in around itself, resembling a scroll of parchment or a rolled newspaper. The interlayer distance - approximately 3.4 Å .

19. The special place of double-walled carbon nanotubes (DWNT) functionalization . In the case of SWNT, covalent functionalization will break some C=C double bonds , leaving "holes" in the structure on the nanotube and thus modifying both its mechanical and electrical properties . In the case of DWNT, only the outer wall is modified.

20. A nanotorus is theoretically described as carbon nanotube bent into a torus (doughnut shape). nanotorus High magnetic moments

21. Nanobud In this new material, fullerene-like "buds" are covalently bonded to the outer sidewalls of the underlying carbon nanotube. They have been found to be exceptionally good field emitters .

22. Extreme CNTs longest carbon nanotubes (18.5 cm long) . shortest carbon nanotube is the organic compound cycloparaphenylene Cycloparaphenylene

23. The thinnest carbon nanotube is armchair (2,2) CNT with a diameter of 3 Å The thinnest freestanding single-walled carbon nanotube is about 4.3 Å in diameter

24. Strength Carbon nanotubes are the strongest and stiffest materials yet discovered in terms of tensile strength and elastic modulus respectively. covalent sp² bonds 63 gigapascals (GPa) . Properties

25. Hardness Diamond is considered to be the hardest material. One study succeeded in the synthesis of a super-hard material by compressing SWNTs to above 24 GPa at room temperature . The bulk modulus of compressed SWNTs was 462–546 GPa , surpassing the value of 420 GPa for diamond

26. Kinetic Multi-walled nanotubes , - perfect linear or rotational bearing Already this property has been utilized to create the world's smallest rotational motor

27. Thermal All nanotubes are expected to be very good thermal conductors along the tube, but good insulators laterally to the tube axis. thermal conductivity along its axis of about 3500 W·m −1 ·K −1 compare this to copper,which transmits 385 W·m −1 ·K −1

28. Toxicity Unfortunately research has only just begun and the data are still fragmentary and subject to criticism . CNTs can enter human cells and accumulate in the cytoplasm , causing cell death . Results of rodent studies shows that it can cause inflammation , epithelioid granulomas (microscopic nodules), fibrosis , and biochemical/toxicological changes in the lungs For those involving chronic exposure, carbon nanotubes can pose a serious risk to human health

29. Techniques have been developed to produce nanotubes in sizeable quantities, including arc discharge , laser ablation , and chemical vapor deposition (CVD) Synthesis

30. Arc discharge Nanotubes were observed in 1991 in the carbon soot of graphite electrodes during an arc discharge During this process, the carbon contained in the negative electrode sublimates because of the high discharge temperatures. Because nanotubes were initially discovered using this technique, it has been the most widely-used method of nanotube synthesis. The yield for this method is up to 30 percent by weight and it produces both single- and multi-walled nanotubes with lengths of up to 50 micrometers with few structural defects

31. Laser ablation In the laser ablation process, a pulsed laser vaporizes a graphite target in a high-temperature reactor while an inert gas is bled into the chamber. Nanotubes develop on the cooler surfaces of the reactor as the vaporized carbon condenses. A water-cooled surface may be included in the system to collect the nanotubes. The laser ablation method yields around 70% and produces primarily single-walled carbon nanotubes.

32. Chemical vapor deposition (CVD) During CVD, a substrate is prepared with a layer of metal catalyst particles, most commonly nickel, cobalt, iron , or a combination The diameters of the nanotubes that are to be grown are related to the size of the metal particles. The substrate is heated to approximately 700°C. To initiate the growth of nanotubes, two gases are bled into the reactor: a process gas (such as ammonia , nitrogen or hydrogen ) and a carbon-containing gas (such as acetylene , ethylene , ethanol or methane ). Nanotubes grow at the sites of the metal catalyst; the carbon-containing gas is broken apart at the surface of the catalyst particle, and the carbon is transported to the edges of the particle, where it forms the nanotubes.

33. Nanotubes being grown by chemical vapor deposition

35. Potential applications Structural clothes : combat jackets concrete : polyethylene : sports equipment :

36. synthetic muscles : high tensile strength fibers : bridges : ultrahigh-speed flywheels : fire protection: · solar cells : superconductor transistor :

37. loudspeaker : replacing piezoelectric speakers in greeting cards Electroacoustic

38. air pollution filter biotech container : hydrogen storage : water filter Chemical

39. Oscillator : Slick surface thermal radiation : Mechanical

40. diode , used to dissipate heat from tiny computer chips paper batteries Electrical circuits

41. www.nanocyl.com/CNT-Expertise.../ Carbon - Nanotubes http://iopscience.iop.org/1367-2630/5/1/117 en.wikipedia.org/wiki/ Carbon _ nanotube http://physicsworld.com/cws/article/print/1761 www.nanotech-now.com /Introduction www.nanocyl.com/CNT-Expertise.../ Carbon - Nanotubes Carbon nanotubes: preparation and properties- Thomas W. Ebbesen ,1997 Carbon nanotubes: basic concepts and physical properties By Stéphanie Reich, Christian Thomsen, Janina Maultzsch

42. Queries?????